I-TEC - everything you may need for your computer

I-TEC - complete portfolio of accessories for laptops and desktops - external enclosures, video and audio adapters, card readers, power supply adapters etc.

HOME ›› ARCHIVE

i-tec WPOINT 300N WLAN Router 300 Mbps 4x LAN, 1X WAN Wireless LAN

P/N:
WPOINT-N300
EAN:
8594047319505




i-tec W-POINT N Router is a combined WLAN/Ethernet router designed specifically for small business, office, and home office networking requirements. This product should not miss on any network for its great features and easy installation. It complies with the IEEE 802.11n (Draft 2.0) standard with transfer rate up to 300 Mbit/s. It includes 4x 10/100Mbps ports to achieve the best possible transmission between clients. It adopts MIMO as well as SST technologies, it has 2 removeable omnidirectional antenna (router's connectors are SMA male) to increase WLAN performance, transmission rates, stability, coverage and reach. CCA ™ technology automatically ensures that, there is no channels collision, it is backward compatible with 802.11b / g protocols.
Wireless-N Router provides extra security: NAT, management SSID, MAC access, security WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK authentication, QSS (Quick Secure Setup).

i-tec W-POINT-N Router operates in four modes:
  • Bridge: Ethernet ports and WLAN interface is bridged to another LAN
  • Gateway: One Ethernet port is connected to the WAN, the other Ethernet ports and WLAN work in the LAN network
  • Ethernet Converter: Wireless is a WAN interface and Ethernet ports are LAN
  • AP Client: Wireless is a WAN interface port, and at the same Wifi AP interface, and ethernet ports are the LAN.

In case of any problems with installation, technical difficulties or faulty fuctionallity of device find possible solution in FAQ bookmark first.




  • WLAN standards: IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b
  • WLAN  transfer rates:
    • 11n
      • 300/270/243/216/162/108/81/54/27 Mbps
      • 135/121.5/108/81/54/40.5/27/13.5 Mbps
      • 130/117/104/78/52/39/26/13 Mbps
      • 65/58.5/52/39/26/19.5/13/6.5 Mbps
    • 11g: 54/48/36/24/18/12/9/6 M(dynamic)
    • 11b: 11/5.5/2/1 M(dynamic)
  • Frequence range: 2.4-2.4835 GHz
  • Transmit power: 20 dBm (MAX)
  • WLAN modulation: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM
  • Signal quality/ transfer speed:
    • 270M: -68dBm@10% PER
    • 130M: -68dBm@10% PER
    • 108M: -68dBm@10% PER
    • 54M: -68dBm@10% PER
    • 11M: -85dBm@8% PER
    • 6M: -88dBm@10% PER
    • 1M: -90dBm@8% PER
  • Interface:
    • 4x LAN 10/100M RJ45 Port (Auto MDI/MDIX)
    • 1x WAN 10/100M RJ45 Port (Auto MDI/MDIX)
  • Antenna: 2x external omnidirectional 2dBi antenna
  • Power Adapter
    • Input: AC 230 V, 50/60 Hz, 0,35 A
    • Output: DC 5 V, 2 A
  • Operating temperature: 0°C~40°C
  • Storage temperature: -40°C~70°C
  • Humidity: 10% ~ 90%, non-condensing
  • Storage humidity: 5%~95% non-condensing
  • Product size 158 x 103 x 25 mm
  • Product weight 162 g
  • Package size 240 x 143 x 54 mm
  • Package weight 403 g

Compatibility
  • Any device with Ethernet LAN card or Wireless LAN (b/g/n) interface
  • Operating System free (any Linux, Mac, Windows 32 b / 64 b)

Package Content
  • 1x Wireless-N Router
  • 2x 10 cm Omnidirectional Antenna
  • 1x RJ-45 Networking Cable (92 cm)
  • 1x Power adapter
  • 1x Quick installation Guide
  • 1x CD with User’s guides

 

Question: WLAN signal falls or has a short range.
Answer: Please check the signal strength (usually displayed in the status bar near the clock). The ideal condition is when it shows 3-5 pieces. If the signal strength is weak, please move the device to have a better reach.

Please also check whether there is too much interference. Obstacles in the form of walls, buildings etc. causes loss of signal.

Question: I own your W-Point WLAN N router, I need to change settings, but when I enter into the browser 192.168.0.1 as it is written in the instructions, so I don’t get set, respectively nothing happens. Am I doing something wrong?
Answer: Set the router to factory settings using the RESET button (about 5-10s hold and then release)
on your PC, set the IP via DHCP server or a fixed IP eg 192.168.0.2, mask 255.255.255.0 and gateway 192.168.0.1. Connect PC and router (in LAN port) by the Ethernet cable and in the browser (Internet Explorer, Mozilla, ..) type 192.168.0.1.

 

webmaster: i-Pages - www.i-pages.cz © Copyright - i-tec Technologies s.r.o., Teslova 2, 702 00 Ostrava, tel.: +420 596 637 130

Soubory cookies nám pomáhají zajišťovat co možná nejsnadnější použití našich webových stránek. Dalším používáním webu s jejich využíváním automaticky souhlasíte. Podrobnosti v kategorii Firemní informace.