I-TEC - everything you may need for your computer

I-TEC - complete portfolio of accessories for laptops and desktops - external enclosures, video and audio adapters, card readers, power supply adapters etc.

HOME ›› NB / PC ACCESSORIES ›› HUBS ›› USB-C HUBS / ADAPTERS

i-tec USB-C Metal HUB with Gigabit Ethernet Adapter, 1x USB-C to RJ-45, 10/100/1000 Mbps, 1x USB 3.0 Port, for laptop, tablet, PC with USB-C connector, compatible with Thunderbolt 3, Windows Mac Linux Android

P/N:
C31METALANHUB
EAN:
8595611702273




Combination of passive USB HUB with Gigabit Ethernet adapter, for easy and fast connection of your favorite USB peripherals to your laptop, tablet, PC with new USB-C or Thunderbolt 3 interface, and for fast network and Internet access with Gigabit Ethernet connection.
The HUB offers one USB 3.0 port with the Plug & Play function and standard USB charging – it will automatically detect connected equipment for USB charging. The USB 3.0 interface is important mainly for data transfers from USB 3.0 memory cards and flash disks which will use its high transfer speed most.
The Gigabit Ethernet port allows you easy access to 10/100/1000 Mbps network. You can enjoy high speed internet access without any interruption.
This HUB is powered from the USB bus and it has a built in overcurrent protection of your computer in case of short connection on the peripheries. It supports a wide range of operating systems from Windows and Mac OS to Linux. Ethernet network connection can also be used in the Android system. However, the support of this function must be included by the manufacturer directly in the particular Android device. You can easily check this support in Network Connection Settings → Other Networks, which must include Ethernet.
The HUB is suitable for use with MacBook Pro 2016, MacBook 2015, Chromebook Pixel 2015, Acer Switch Alpha 12, Dell XPS 13, HP EliteBook Folio G1, ASUS UX390UAK and other devices with the USB-C connector. The USB-C connector has many advantages, it is smaller, symmetrical and allows easy connection, because now you don’t have to worry about the rotation of the connector. More information about the USB-C is available here.

In case there are any problems with the installation, technical difficulties or incorrect function of the equipment, please check first for the possible solution in detailed manual or in the FAQ tab.




 

 

  • Combination of passive USB HUB with Gigabit Ethernet adapter, for easy and fast connection of your favorite USB peripherals to your laptop, tablet, PC with new USB-C or Thunderbolt 3 interface, and for fast network and Internet access with Gigabit Ethernet connection
  • 1x USB-C 3.1 connector, for connecting to a laptop, tablet or PC
  • Fast network and Internet access with Gigabit Ethernet connection, 1x Ethernet GLAN RJ-45 port supports 10 / 100 / 1000 Mbps speeds
  • 1x USB 3.0 port for connecting the USB equipment and high speed data transfer (5 Gbps)
  • Supports Wake-on-LAN and Plug & Play function
  • Via VL813 Chipset – USB 3.0 HUB
  • Realtek RTL8153 Chipset – USB 3.0 to Gigabit Ethernet – supports standard IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3az (Energy Efficient Ethernet)
  • Powered through USB-C bus, no power adapter is needed
  • OS: Windows 7 32/64bit, Windows 8 32/64bit, Windows 8.1 32/64bit, Windows 10 32/64bit, Mac OS, Linux, Android
  • Product dimensions: 65 x 50 x 15 mm
  • Product weight: 39 g
  • Packaging dimensions: 180 x 100 x 20 mm
  • Packaging weight: 93 g

 

SYSTEM REQUIREMENTS
Hardware requirements: laptop, tablet, PC with free USB-C or Thunderbolt 3 port

Operation system: Windows 7 32/64bit, Windows 8 32/64bit, Windows 8.1 32/64bit, Windows 10 32/64bit, Mac OS, Linux, Android

PACKAGE CONTENTS

  • i-tec USB-C Adapter with cable (70 mm)
  • Quick Start

 

Question: Wi-fi or Bluetooth stop working on my MacBook 13 "/ 15" 2016 and later, or USB 3.0 devices connected to the adapter are disconnected. Where is the problem?

Answer: This problem is caused by interference in the 2.4GHz band. The possible solution is that you connect the adapter to the Mac's Thunderbolt 3 (USB-C) port on the left-hand side closest to you or use ports on the right. These ports are located farthest from the wi-fi antenna. Another solution is to use the 5GHz band and place the adapter as far as possible from your Mac monitor. More detailed information can be found here: https://support.apple.com/en-gb/HT201163

 

Question: In Windows, some wireless devices (WLAN dongle or, for example, Microsoft Wireless Set 3000/5000) that are plugged into an adapter stop working or irregularly disconnect. Where is the problem?

Answer: Sometimes USB 3.0 ports are being interrupted with 2.4GHz wireless devices. The wireless device should be located outside the immediate distance of USB 3.0 ports and cables. So try to move your wireless device away from USB 3.0 ports and cables. For example, you can use an extension cable to connect a WLAN dongle or set.

 

Question: There are LAN failures in macOS.

Answer: The drivers are automatically installed from the system. However, it may happen that automatic installation does not take place correctly. In this case, please install the drivers that can be downloaded from our www.i-tec.cz on the "Download" tab of this product. Notice: Install the drivers only in case of trouble!

 

Most of potential problems with the hub and connected peripherals can be solved by disconnecting the USB-C cable from your laptop/tablet and reconnecting it after about 10 seconds. In case of problems, please contact our technical support: support@itecproduct.com.

 

webmaster: i-Pages - www.i-pages.cz © Copyright - i-tec Technologies s.r.o., Teslova 2, 702 00 Ostrava, tel.: +420 596 637 130

Soubory cookies nám pomáhají zajišťovat co možná nejsnadnější použití našich webových stránek. Dalším používáním webu s jejich využíváním automaticky souhlasíte. Podrobnosti v kategorii Firemní informace.