Go to

I-TEC - everything you may need for your computer

I-TEC - complete portfolio of accessories for laptops and desktops - external enclosures, video and audio adapters, card readers, power supply adapters etc.

HOME ›› ARCHIVE

i-tec WiFi Repeater Access Point 300/150/54 Mbps WLAN Wireless network range extender with LAN connection

P/N:
WPOINT-REPEAT
EAN:
149




Via i-tec WiFi Repeater you can easily extend the reach of your wireless network by pressing the WPS button (Wi-Fi Protected Setup). Connect the device to any socket in your home, press the WPS button and you can wirelessly surf. Ideal for everyday internet use, streaming HD video, music or online playing. i-tec WiFi Repeater operates at speeds up to 300 Mbps, supports standard 802.11n, 802.11g and 802.11b and has integrated wireless security WPA2, WPA and WEP (128/64).

In case of any problems with installation, technical difficulties or faulty fuctionallity of device find possible solution in FAQ bookmark first.




  • WLAN standards IEEE 802.11 b, g, n, standards Ethernet 100/10 Mbps
  • Increases/improves wireless coverage all WLAN network of frequence range 2.4 GHz/ in 2.4 GHz band
  • WLAN 802.11n (Draft 2.0) for high-speed wireless access (300 Mbps)
  • Backward compatible with 802.11g (54 Mbps) and 802.11b standard (11 Mbps)
  • Support in frequence range 2.4 GHz for WLAN networks
  • Easy WLAN settings by pressing the WPS button (Wi-Fi Protected Setup)
  • Maximum WLAN security with WPA2, WPA and WEP (128/64)
  • RESET button for default setting restoration
  • Quick guide for easy/simple settings
  • Antennas integrated
  • Product size 111 x 87 x 60 mm
  • Product weight 111 g
  • Package size 220 x 143 x 72 mm
  • Package weight 216 g

Package contents
  • Wireless-N Repeater with adapter to power socket
  • RJ-45 Networking Cable (100 cm)
  • CD (Manuals)
  • Quick installation Guide

 

Question: WLAN signal falls or has a short range.
Answer: Please check the signal strength (usually displayed in the status bar near the clock). The ideal condition is when it shows 3-5 pieces. If the signal strength is weak, please move the device to have a better reach.

Question: I want to change settings, but on 192.168.10.1 no access. What is wrong?
Answer: Set repeater to factory default (you need press and hold the RESET button inside the tiny hole for 10 seconds), on PC/NB set IP e.g. 192.168.10.2, mask: 255.255.255.0 and Gateway: 192.168.10.1. Connect PC/NB and repeater with network cable and then in web browser (IE, Mozilla,…) write 192.168.10.1.

Question: How is recommended distance by WLAN router in repeater mode?
Answer: We recommend min. 50% strength/quality of signal in place of repeater´s receiving.

webmaster: i-Pages - www.i-pages.cz © Copyright - ComDis s.r.o., Cihelní 3285, Ostrava, tel.: